PUBLICATIONS > Conférences internationales > Année 2005

Alzina A., Beakou A., Toussaint E. and Skoczen B.,
Thermal boundary resistance in glass fibre-reinforced composite at cryogenic temperature,
International conference on interfaces and interphases in multicomponent materials (IIMM2005),
CD-ROM, 6 p., Lyon, France, September 2005.

Andreff N., Marchadier A., Martinet P.
Vision-based control of a Gough-Stewart parallel mechanism using legs observation.
In Proc. Int. Conf. Robotics and Automation (ICRA'05), pages 2546-2551, Barcelona, Spain, April 18-22, 2005

Andreff N., Martinet P.
Visual servoing of a Gough-Stewart parallel robot without proprioceptive sensors.
In Fifth International Workshop on Robot Motion and Control (RoMoCo'05), Dymaczewo, Poland, June 23-25 2005.

Andreff N., Martinet P.
Visually servoing a gough-stewart parallel robot allows for reduced and linear kinematic calibration.
In Proc. Int. Conf. on Informatics in Control, Automation and Robotics (ICINCO'05), volume 3, pages 119-124, Barcelona, Spain, September 14-17 2005.

Aoues Y., Chateauneuf A.,
Adaptive target component reliabilities for optimization of structural systems,
Safety and Reliability of Engineering Systems and Structures, Augusti G., Schuëller G.I. and Ciampoli M. eds., ICOSSAR, Rome, Millpress, Rotterdam, June, 19-23, ISBN 90 5966 040 4, 2005.

Auslender F., Bilger N., Bornert M., Zaoui A.,
New  bounds  and  estimates for porous media: Effect of a non uniform distribution of voids on the plastic response of voided materials,
EUROMECH Colloquium 468, Multi-scale Modelling in the Mechanics of Solids, june 29-1, St Petersbourg, Russia, 2005.

Beakou A., Duriatti D. and Levillain R.,
Modelling of time-dependant interfacial debonding in brittle composite materials,
International conference on interfaces and interphases in multicomponent materials (IIMM2005), CD-ROM, 6 p., Lyon, France, September 2005.

Berveiller M., Sudret B., Lemaire M.,
Non linear non intrusive stochastic finite element method - Application to a fracture mechanics problem,
Safety and Reliability of Engineering Systems and Structures, pp. 385 + CDRrom, Augusti G., Schuëller G.I. and Ciampoli M. eds., ICOSSAR, Rome, Millpress, Rotterdam, June 19-23, 2005, ISBN 90 5966 040 4.

Berveiller M., Sudret B., Lemaire M.,
Structural Reliability Using Non-Intrusive Stochastic Finite Elements,
12th IFIP WG 7.5 Working Conference on Reliability and Optimization of Structural Systems, Aalborg, 2005.

Bonnet M., Grediac M., Hild F., Pagano S., Avril S. and Pierron F.,
Extracting constitutive parameters from full-field measurements: a review of identification methods,
2005, p.93, Euromech-Mecamat 2005. 8th European Mechanics of Materials Conference on Material and Structural, Identification from Full-Field Measurements, Cachan 13-15 September 2005

Cano T., Andreff N., Lavest J.M., Ray P.
Identification of geometrical defects using a multiple stereovision system -
XII Seminario Anual de Automática, Electrónica Industrial e Instrumentación, SAAEI 2005.

Chateauneuf A.,
Reliability-based optimization of timber space frames,
Safety and Reliability of Engineering Systems and Structures, Augusti G., Schuëller G.I. and Ciampoli M. eds., ICOSSAR, Rome, Millpress, Rotterdam, June, 19-23 2005. ISBN 90 5966 040 4.

Chateauneuf A.,
Reliability-based optimization of timber space frames,
PRObabilistic MOdels in Timber Engineering, 8-9 September, Arcachon, 2005.

Chateauneuf A., Castera P.,
Reliability-based assessment of system effect in timber structures,
RObabilistic MOdels in Timber Engineering, 8-9 September, Arcachon, 2005.

Chateauneuf A., Noret E.,
System reliability-based optimization of redundant timber trusses,
12th IFIP WG 7.5 Working Conference on Reliability and Optimization of Structural Systems, Aalborg, 2005.

Company O., Pierrot F., Fauroux J-C.,
A Method for Modeling Analytical Stiffness of a Lower Mobility Parallel Manipulator,
IEEE International Conference on Robotics and Automation (ICRA'2005), April 18th-22nd 2005, Barcelona, Spain, 6 pages, Paper n°1195.

Daucher D., Fogli M., Clair D.,
Modelling of complex structural dynamical behaviours based on a vector ARMA identification procedure,
9th International Conference On Structural Safety and Reliability, ICOSSAR’05, Rome (Italie), CDRom (6p.), June 20-23, 2005.

Daucher D., Fogli M., Clair D.,
A spectral linearization technique in stochastic structural analysis,
6th European Conference on Structural Dynamics, EURODYN 2005, Paris (France), CDRom (6p.), Sept. 4-7, 2005.

Deheeger F., Lemaire M., Pendola M., Vallino D.,
Reliability analysis of a blade shedding safety system,
Safety and Reliability of Engineering Systems and Structures, p. 544 + CDRom, Augusti G., Schuëller G.I. and Ciampoli M. Eds., ICOSSAR, Rome, Millpress, Rotterdam, June, 19-23, 2005, ISBN 90 5966 040 4.

Destrebecq J.F., Toussaint E., Grediac M.,
Time dependent effects in RC-beams strengthened with CFRP-composite laminates,
Fifth International Conference 'Analytical Models and new Concepts in Concrete and Masonry Structures' (AMCM’2005), Ustron (Poland), 8p., June 2005.

Diouf F., Paladian F., Fogli M., Bonnet P., Girard S., Vernet R.,
Probabilistic study of reverberation chamber electromagnetic fields coupling and plane wave interaction with an electric object,
IEE International Symposium on Embedded EMC “2emc”, Rouen (France), CDRom (6p.), Sept. 26-28, 2005.

Gagnol V., Bouzgarrou B-C., Ray P.,
Modelling approach for a high speed machine tool spindle-bearing system,
CD-ROM proceedings of the International Design Engineering Technical Conferences, September 24 – 28, 2005, Long Beach – USA, 8 pages (Actes sur CD-ROM).

Gagnol V., Bouzgarrou B-C, Ray P., Barra C.,
Dynamic analysis of a high speed machine tool spindle-bearing system,
CD-ROM proceedings of the ECCOMAS Conferences, June 21 – 24, 2005, Madrid – Spain.

Gogu G.
Structural Synthesis and Singularity Analysis of 6R Orthogonal Robotic Manipulators with Three Parallel Axes,
Proceedings of the International Symposium on Multibody Systems and Mechatronics (MUSME 2005), Uberlandia, Brazil, 6-9 March 2005. (Actes sur CD-ROM).

Gogu G.
Fully-Isotropic Over-Constrained Parallel Wrists with Two Degrees of Freedom,
in Proceedings of 2005 IEEE International Conference on Robotics and Automation (ICRA 2005), Barcelona, Spain , 18-22 April 2005, ISBN 0-7803-8915-8 , pp. 4025-4030.

Gogu G.
Mobility criterion and overconstraints of parallel manipulators,
in Proceedings of International Workshop on Computational Kinematics (CK2005), Cassino, Italy, May 4-6, 2005, Paper 22-CK2005, (Actes sur CD-ROM).

Gogu G.
Singularity-free fully-isotropic parallel manipulators with Schönflies motions,
in Proceedings of 12th International Conference on Advanced Robotics (ICAR 2005), Seattle, USA, July 18-20 2005, ISBN 0-7803-8913-1, pp. 194-201.

Gogu G.
Fully-isotropic parallel robots with four degrees of freedom T2R2-type,
in Proceedings of 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2005), Edmonton, Canada, 2-6 August 2005, ISBN 0-7803-9178-0, pp. 1190-1195.

Gogu G.
Fully-isotropic T1R2-type parallel robots with three degrees of freedom,
in Proceedings of International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2005), Long Beach, USA, 24-28 September 2005, ISBN 0-7918-3766-1, 8 pages (Actes sur CD-ROM).

Gogu, G., Ray, P.
Polynomial functions with parametric coefficients for cam mechanisms,
Invited paper, Proceedings of CT2005, International Workshop on Cam Transmission, Naples, November 4, 2005 Paper - CT2005, 16 pages, (Actes sur CD-ROM).

Guede Z., Sudret B., Lemaire M.,
Life-time reliability based assessement of structures submitted to random thermal loading,
Fatigue Design 2006, Senlis (France), CETIM, November 16-18, 2005.

Hahnel A., Lemaire M., Rieuneau F.,
Contributions towards mechanical-based reliability predictionframework for complex system,
Safety and Reliability of Engineering Systems and Structures, p. 408 + CDRom, Augusti G., Schuëller G.I. and Ciampoli M. Eds., ICOSSAR, Rome, Millpress, Rotterdam, June, 19-23 2005, ISBN 90 5966 040 4.

Hahnel A., Rieuneau F., Lemaire M.,
A New Model Formalism for Mechanical-Based Reliability Analysis of Systems,
Proceedings of the Annual Reliability and Maintenability Symposium, paper 09D5, CDRom, The International Symposium on Product Quality & Integrity, January 24-27, 2005.

Lebaillif D., Darcis P., Recho N.,
A New Residual Stress Opening Approach at the Crack Tip following an Overload during Fatigue,
11th International Conference on Fracture (ICF 11) , mars 2005, Turin (Italie)

Lebaillif D., Recho N.,
Crack Box Technique Associated to Brittle and Ductile Crack Propagation and Bifurcation Criteria,
11th International Conference on Fracture (ICF 11) , mars 2005, Turin (Italie)

Lemaire M., Pendola M.,
Phimeca-Soft: How to interact between mechanics and probability,
Safety and Reliability of Engineering Systems and Structures, CDRom, Augusti G., Schuëller G.I.and Ciampoli M. Eds., ICOSSAR, Rome, Millpress, Rotterdam, June 19-23, 2005, ISBN 90 5966 040 4.

Li J., Recho N.,
Hamiltonian Formalisms In Elasticity - Potential Use for Fracture Mechanics,
11th International Conference on Fracture (ICF 11) , mars 2005, Turin (Italie)

Li J., Zhang X.B.,
A criterion study for non-singular stress concentration with size effect,
11th International Conference on Fracture, Turin, Italy, Mars 2005

Ma S., Zhang X.B., Recho N.,
The Mixed Mode Experiment Investigation of the Fatigue Crack in CTS Metallic Specimen,
11th International Conference on Fracture (ICF 11) , mars 2005, Turin (Italie)

Mendoume D., Fogli M., Bernard P.,
Some remarks about the random decrement method,
International Conference on Experimental Vibration Analysis for Civil Engineering Structures, EVACES 2005, Bordeaux (France), CDRom (8p.), Oct. 26-28, 2005

Muller M., Toussaint E., Destrebecq J.F., Grediac M.,
Influence of rheologic effects on the long term behaviour of reinforced concrete beams strengthened with composite plates,
Third International Conference on Composites in Construction (CCC 2005), Lyon, July 2005, pp 429-435.

Nespurek L., Bourinet J.-M., Gravouil. A., Lemaire M.,
Probabilistic approach to crack propagation based on XFEM and FORM,
Fatigue Design 2006, Senlis (France), CETIM, November 16-18, 2005.

Neves R., Venturini W.S., Chateauneuf A.,
Efficient local reliability analysis of reinforced concrete,
Safety and Reliability of Engineering Systems and Structures, Augusti G., Schuëller G.I. and Ciampoli M. eds., ICOSSAR, Rome, Millpress, Rotterdam, June, 19-23, 2005, ISBN 90 5966 040 4.

Paladian F., Bonnet P., Vernet R., Diouf F., Girard S., Lallechere S., Fogli M.,
Adaptation of deterministic and probabilistic methods EMC problems. Application to Mode Stirred Reverferation Chambers,
International Conference on Electromagnetics in Advanced Applications and European Electromagnétic Structures Conference, ICEAA’05, Turin (Italie) , CDRom (6p.), Sept. 12-16, 2005.

Pellicier A., Loyau T., Parot J-M
Application of Fast Multipole Methods for Acoustic Radiation Problems.
Com. n° 57, Congrès Novem, Saint-Raphaël, Avril 2005, 11 pages.

Perrin F., Sudret B., Lemaire M.,
Statistical treatment of fatigue test data,
Fatigue Design 2006, Senlis (France), CETIM, November 16-18, 2005.

Pustoc'h A., Labesse-Jied F., Cheze L., Terver S.,
Study of three-dimensional osteometric scaling scheme applied on musculoskeletal models,
Proceedings du 30ème Congrès de la Société de Biomécanique in Computer Methods in Biomechanics and Biomedical Engineering, Bruxelles, septembre 2005.

Raphael W., Chateauneuf A., Seif El Dine B.,
Information-based formulation for Bayesian concrete creep model updating,
Safety and Reliability of Engineering Systems and Structures, Augusti G., Schuëller G.I. and Ciampoli M. eds., ICOSSAR, Rome, Millpress, Rotterdam, June, 19-23, 2005, ISBN 90 5966 040 4.

Raphael W., Chateauneuf A., Seif El Dine B., Calgaro J.A.,
Reliability-based assessment of creep models for high performance concrete using Bayesian updating,
FIP symposium: Keep concrete attractive, Budapest, Hongry, May, 2005.

Recek S., Lemaire M., Millard A.,
Numerical Karhunen-Loève Expansion of a Covariance Function on a Multidimensional Domain Via Finite Elements Method,
Computational Fluid and Solid Mechanics 2005, pp.104-159, Bathe, K.J. ed., MIT, Elsevier Science Ltd, June 14-17, 2005.

Robin V., Sabourin L., Gogu G., Fauconnier J-M,
Optimisation de trajectoire en usinage et polissage robotisés pour pièces de grandes dimensions,
CPI2005, Casablanca, Maroc, Novembre 2005 (Actes sur CD-ROM).

Syed Muhammad K., Toussaint E., Grediac M. and Avril S.,
Characterization of composite plates using the virtual fields method: piecewise virtual fields, minimization of noise effect and opimization of testing configuration,
2005, pp. 177-184, Euromech-Mecamat 2005. 8th European Mechanics of Materials Conference on Material and Structural, Identification from Full-Field Measurements, Cachan 13-15 September 2005.