PUBLICATIONS > Revues internationales > Année 2006

ALICI, G., METZ, P., SPINKS, G. M.,
A methodology towards geometry optimization of high performance polypyrrole (PPy) actuators,
Smart Materials and Structures vol. 15, pp. 243–252, 2006.

ALZINA A., TOUSSAINT E., BEAKOU A., SKOCZEN B.
Multiscale modeling of thermal conductivity in composite material for cryogenic structures.
Composites Structures, Vol. 74 n° 2, pp 175-185, 2006.

AMIRAT A., MOHAMED-CHATEAUNEUF A., CHAOUI K.
Reliability assessment of underground pipelines under the combined effect of active corrosion and residual stress,
International Journal of Pipings and Pressure Vessels, Elsevier, Vol. 83, n° 2, pp. 107-117, 2006.

ANDREFF, N. and MARTINET, P.
Unifying kinematic modeling, identication and control of a Gough-Stewart parallel robot into a vision-based framework
IEEE Transactions on Robotics, 2006. Accepté.

ANDREFF, N. DALLEJ, T. and MARTINET
Image-based visual servoing of a Gough-Stewart parallel manipulator using leg observations
Joint Issue of International Journal on Computer Vision and International Journal of Robotics Research on Vision and Robotics, 2006. Accepté.

ARBAOUI H., GOURVÈS R., BRESSOLETTE Ph., BODÉ L.
Mesure de la déformabilité des sols in situ à l'aide d'un essai de chargement statique d'une pointe pénétrométrique
Rev. can. geotech./Can. Geotech. J. 43(4) p.355-369, avril 2006

Baroth J., Bodé L., Bressolette Ph., Fogli M.
SFE method using Hermite polynomials: An approach for solving nonlinear mechanical problems with uncertain parameters,
Computer Methods in Applied Mechanics and Engineering, Elsevier, Vol. 195, Issues 44-47, pp.6479-6501, 2006.

BAROTH J., BRESSOLETTE Ph., CHAUVIERE C., FOGLI M.
An efficient SFE method using Lagrange polynomials: application to nonlinear mechanical problems with uncertain parameters,
Computer Methods in Applied Mechanics and Engineering, Elsevier, accepté en 2006, à paraître.

BERVEILLER M., SUDRET B., LEMAIRE M.
A Non Intrusive Approach by Regression,
European Journal of Computational Mechanics, 15(1-3) pp.81-92, 2006.

CHANAL H., DUC E., RAY P.
A study of the impact of machine tool structure on machining processes ,
International Journal of Machine Tools and Manufacture, vol44, n°2, pp98-106, 2006.

CHANAL H., DUC E., RAY P. HASCOET J.Y.
A new approach for the geometrical calibration of parallel kinematics machines tools based on the machining of a dedicated part,
International Journal of Machine tools and Manufacture – à paraitre (accepté à publication 02/09/06)

CHAPELLE F., BIDAUD P.
Evaluation functions synthesis for optimal design of hyper-redundant robotic systems,
IFToMM Mechanism and Machine Theory, vol. 41, no 10, pp. 1196-1212, 2006.

DANEY D., ANDREFF N., and PAPEGAY Y.
Interval method for calibration of parallel robots: A vision-based experimentation.
Mechanism and Machine Theory, Special Issue on Computational Kinematics 2005, vol. 41, n° 8, pp. 929-944, 2006.

Darcis Ph., LASSEN T., RECHO N.
Fatigue behavior of welded joints - Part 2: Physical modeling of the fatigue process,
Welding Journal - AWS – WRC – January 2006 pp 19s – 26s.

Daucher D., Fogli M., Clair D.
Modelling of complex dynamical behaviours using a state representation technique based on a vector ARMA approach,
Probabilistic Engineering Mechanics, Elsevier, 21, pp.73-80, 2006.

Deshayes L , Vacher A., Welsch L., Donmez A.
Towards an Information Processing Representation for Dynamic Process Optimization in Smart Machining Systems,
IJDeM, accepté en 2006, à paraître.

DESHAYES L.
Analysis of an Equivalent Tool face for the Cutting Speed Range Prediction of Complex Grooved Tools,
Materials Processing Technology, Elsevier, à paraître (2007).

DESHAYES L., RIGAL J.-F., PLAY D.
Proposed Methodology for optimizing Grooving Operations of Ferrous Sintered Materials,
Proceedings of the institution of Mechanical Engineers, Part B: Journal of Engineering manufacture, Vol. 220, n°4, 555-569, 2006.

DESTREBECQ J.F., GREDIAC M., SIERRA-RUIZ V.
The transfer length in reinforced concrete structures strengthened with composite plates: experimental study and modelling,
Composites Science and Technology, (accepté).

DURIATTI D., BEAKOU A., LEVILLAIN R.
Optimisation of the crimping process of a metal end-fitting onto a composite rod,
Composites Structures, Vol. 73, n°3, pp 278-289, 2006.

GAGNOL V., BOUZGARROU C. B., RAY P., BARRA C.
Model-based chatter stability prediction for high-speed spindles,
International Journal of Machine tools & Manufacture, article accepté le 01/09/06, 25 pages

GREDIAC M. and PIERRON F.
Applying the virtual fields method to the identification of plastic constitutive equations,
International Journal of Plasticity, vol. 26, no 4, pp. 602-627, 2006

GREDIAC M. and PIERRON F. and AVRIL S. and TOUSSAINT E.
The virtual fields method for extracting constitutive parameters from full fields measurements: a review,
Strain, vol. 42, pp. 233-253, 2006

IVESTER R., DESHAYES L., MCGLAUFIN M.,
Determination of Parametric Uncertainties for Regression-Based modeling of Turning Operations,
Transactions of NAMRI/SME, accepté en 2006, à paraître.

KADRY S.,
Generalization of probabilistic transformation method for solving random differential equations
Journal of Mechanical Engineering 57, 5 (2006)

LAPUSTA Y., HARICH J., WAGNER W.
Micromechanical formulation and 3D finite element modeling of microinstabilities in composites,
Computational Material Science (accepté) (2006).

LEBAILLIF D., RECHO N.
Brittle and Ductile Crack Propagation Using Automatic Crack Box Technique,
Engineering Fracture Mechanics, EFM 2406, accepté le 28 août 2006.

LEMAIRE M., PENDOLA M.
Phimeca-Soft,
Structural Safety, 28,130-149, 2006.

LI J., ZHANG X.B.
A criterion study for non-singular stress concentrations in brittle or quasi-brittle materials,
Engineering Fracture Mechanics, Vol. 73, N° 4, pp 505-523.

LI J., ZHANG X.B.
Crack Initiation Prediction for V-notches under Mixed Mode Loading in Brittle Materials,
Journal of Mechanics of Material and Structure, Vol. 1, No. 8, pp1385-1404, 2006.

MA S., ZHANG X.B., RECHO N., LI J.
The Mixed-Mode Investigation of the Fatigue Crack in CTS Metallic Specimen,
Int. Journal of Fatigue, Volume 28, Issue 12, December 2006, Pages 1780-1790.

MATHIAS J.D., BALANDRAUD X., GREDIAC M.
Experimental investigation of composite patches with a full-field measurement method,
Composites Part A: Applied Science and Manufacturing, Vol. 37, pp 177-190, 2006.

MATHIAS J.D., BALANDRAUD X., GREDIAC M.
Applying a genetic algorithm to the optimization of composite patches,
Computers and Structures, Volume 84, Issue 12, Pages 823-834, 2006.

MATHIAS J.D., GREDIAC M., BALANDRAUD X.
On the bidirectional stress distribution in rectangular bonded composite patches,
International Journal of Solids and Structures, Volume 43, Issues 22-23, November 2006, Pages 6921-6947.

MEISSONNIER J., FAUROUX J.C., GOGU G., MONTEZIN C.
Geometric identification of an elastokinematic model in a car suspension,
Journal of Automobile Engineering, IMech Part D vol. 220, , 2006, pp. 1209-1220.

MEISSONNIER J., METZ, P., FAUROUX J.C., GOGU G., MONTEZIN C.
Iterative identification of stiffness parameters in a car suspension elastokinematic model,
IMech Journal of Automobile Engineering, vol. 220(11), Part D, 2006 pp. 1477-1489.

Mendoume D., Fogli M., Bernard P.
Asymptotic analysis of the random decrement,
Probabilistic Engineering Mechanics, Elsevier, accepté en 2006, à paraître.

METZ P., ALICI, G., SPRINKS, G. M.
A finite element model for bending behaviour of conducting polymer electromechanical actuators,
Sensors and Actuators, à paraître 2006.

MUNTEANU M., GOGU G., RAY P.
Method for a simple and fast dynamic analysis of 3D mechanisms,
IMech Multibody System Dynamics, accepté à publication 28/08/06, 37 pages.

NEVES R., CHATEAUNEUF A., VENTURINI, W.S., LEMAIRE M.
Reliability Analysis of Reinforced Concrete Grids with Nonlinear Material Behavior,
Reliability Engineering and System Safety 91, pp.735-744, 2006.

Neves R., Chateauneuf A., Venturini W.S.
Reliability-based optimization of structural systems by adaptive target safety. Application to reinforced concrete frames,
Structural Safety, Elsevier, accepté en 2006, à paraître.

NGARGUEUDEDJIM K., ANAGO G., ROBERT J.L.
Adaptation of cumulative damage models to multiaxial fatigue, 
Material Prüfung, vol 48, N 4, pp.160-163, 2006.

PAROT J-M., DUPERRAY B.
Application of exact causality relationships to materials dynamic analysis,
Mechanics of materials, 16 pages, à paraître 2006.

PAROT J-M., THIRARD C., PUILLET C.
Elimination of a non-oscillatory instability in a retarded potential integral equation,
Engineering analysis with boundary elements, à paraître 2006.

PATELOUP V, CHANAL H, DUC E, RAY P
HSM adapted tool path calculation, for pocketing,
Machine Sciences and Technology, , vol10, n°2, pp 181-196, 2006.

QUINSAT Y. et SABOURIN L.
Optimal selection of machining direction for 3 axis milling of sculptured parts,
International Journal of Advanced Manufacturing Technology, vol 27, pp 1132-1139, 2006

RENAUD P., ANDREFF N., LAVEST J-M, and DHOME M.
Simplifying the kinematic calibration of parallel mechanisms using vision-based metrology.
IEEE Transactions on Robotics, 2006, vol. 22, n° 11, pp. 11-22, February 2006.

RENAUD P., VIVAS A., ANDREFF N., POIGNET P., MARTINET P., PIERROT F., and O. Company
Kinematic and dynamic identification of parallel mechanisms.
Control Engineering Practice, vol 14/9, pp. 1099-1109, 2006.

RIZK R., FAUROUX J.C., MUNTEANU M., GOGU G.
A comparative stiffness analysis of a reconfigurable parallel machine with three or four degrees of mobility,
Journal of Machine Engineering, vol. 6, n°2, pp.45-55, 2006.

Robin V., Sabourin L., Gogu G.,
Robotized cell modelling. Application to the machining and polishing of large cast parts,
Revue Internationale d'Ingénierie Numérique, Vol 2, No.1-2, pp.185-198, 2006.

TALEB R., BAROTH J., BODÉ L., BRESSOLETTE Ph.
Étude par éléments finis stochastiques d'assemblages par tiges collées de poutres bois.
Revue Européenne de Génie Civil, Vol. 10, n° 5, p.~583-598, 2006

TOUSSAINT E. and Destrebecq J.F. and GREDIAC M.
Rheologic effects in reinforced concrete beams strengthened with CFRP-composite plates,
Archives of Civil Engineering, Vol. 52, n°2, 2006, pages 441-454.

TOUSSAINT E., GREDIAC M., PIERRON F.
The virtual Fields method with piecewise virtual fields,
International Journal of Mechanical Sciences, Vol. 48, P. 256-264, 2006.

WEBER B., NGARGUEUDEDJIM K., SOH FOTSING B., ROBERT J.L.
On the efficiency of the integral approach in multiaxial fatigue, 
Material Prüfung, vol 48, N 4, pp.156-159, 2006.

YASNIY P., MARUSHCHAK P., LAPUSTA Y.
Crack growth in a bimetal under fatigue and fatigue-creep conditions,
International Journal of Fracture, Letters in Fracture and Micromechanics (accepté) (2006).

ZHANG X.B., MA S., RECHO N., LI J.
Bifurcation and Propagation of a Mixed-Mode Crack in a Ductile Material,
Engineering Fracture Mechanics, Vol. 73, No. 13, pp 1925-1939, 2006.